Tappwater - The Tap Water Filter Chrome

The filter is made of ABS plastic, free of BPA and phthalates. The carbon disc is made from coconut shells (70%), which is biodegrade and UHMW (30%), which is inert, stable and does not accumulate in marine life.

Dimensions: 12.2 x 6.8 x 5.8 cm (5.8 x 2.7 x 2.5 in.)

Weight: 145 g

Thread diameter: 22 mm

Tool Free, Simple Installation:

1. Remove Aerator: Twist off the aerator from your faucet’s spout.

2. Attach Connector: Screw the filter’s connector onto the thread of you faucet. Make sure it’s firmly seated.

3. Activate Filter: Flip the filter’s lever to switch between filtered and unfiltered water as desired.


Use hot water only in the NO filter position

Avoid washing the filter with soap

If you haven’t used the filter in several days, let the filtered water run for 30 seconds

Avoid exposing the filter to heat

When disposing the refills separate the parts. The plastic can be recycled but the carbon block should be disposed with other waste as it accumulates contaminants inside.

Tappwaters filter through the carbon block catching particles down to 1-2 microns (also known as micrometres, µm), filtering up to 99% of microplastics.

• ✅ Chlorine

  Filters 95% or more

• ✅ Limescale

  Reduced by 80%

• ✅ Microplastic

  Filters 99%

• ✅ Heavy Metals

  Filters 95%

• ✅ Pesticides

  Filters 99%+

• ✅ Minerals

  Maintain the minerals

• ✅ Chlorine byproducts

  Filters 95%+ or more

• ✅ Other impurities

  Filters 95%